Chilo Signature Hot and Cold Plunge | Built In 1 HP Chiller, Double Wall 316 Stainless, 120V
The Room You Didn't Know the House Was Missing
Best for: Residences finished to the last hinge, where the plunge should look as though the architect drew it in from the very beginning.
Why Buy From Forge
✓ Lifetime structural warranty on the stainless tub and frame
✓ Free curbside delivery in the lower 48
✓ Plugs into a standard 120V, 20 amp outlet
✓ Support at 760.840.5141
About the Signature
Early morning, before the house wakes. Low light moves across the terrace stone. The water rests at 37°F, glassy and undisturbed.
This is the Signature's hour.
It is conceived as fine millwork: a 92 inch cabinet clad in cedar, Thermory, or TimberTech, crowned with a solid surface top in the finish of your choosing. The stainless tub sits within it the way a basin sits within a bespoke vanity. Every mechanical element lives behind a wood door. No separate unit at its side. Nothing a guest would ever need explained.
As evening falls, it becomes another place altogether. Bring it to 104°F, settle in, and let the day loosen its hold as the garden lights rise around you.
Give it the placement you would give a piece you treasure: at the far edge of the pool, beneath a pergola, in a courtyard off the primary suite, or in a lower level spa room finished in plaster and oak. Here, the architecture and the plunge read as one.
Every Signature is built to order in Southern California, for a single address. Yours.
The information presented on this page is for general wellness and educational purposes only. Statements regarding these products have not been evaluated by the Food and Drug Administration. These products do not intend to diagnose, treat, cure, or prevent any disease. Consult a qualified healthcare provider before beginning any new wellness routine, especially if you are pregnant, nursing, or have a pre-existing medical condition.
Key Features
- Double wall insulated 316 marine grade stainless steel tub on a 316 stainless steel frame
- Chiller, pump, filtration, electrical, and drain built into the cabinet, behind a wood equipment door
- One 1 HP unit handles both chilling and heating: cold to 37°F, hot to 105°F
- Dual stage filtration: 5 micron filter plus ozone, with a 1,200 GPH pump
- Digital control panel plus Wi-Fi app control
- Siding: Cedar, Thermory Modified Wood, TimberTech Weathered Teak, or TimberTech Mahogany
- Countertop: Solid White or 46 other Staron colors at no charge; Carbon Concrete or 53 other premium colors for +$250 (see the color guide)
- Floor drain with hose hookup
- Indoor or outdoor use
Dimensions & Specifications:
- Exterior: 92" L x 34" W x 31" H
- Interior tub: 60" L x 25" W x 24" D
- Pad size: 92" x 34" plus clearance
- Water capacity: 140 gallons
- Weight: 600 lbs empty, about 1,770 lbs filled
- Power: 120V, 20 amp, outdoor rated GFCI plug
- Water supply: 3/4" inlet and outlet
- Ventilation: 12" clearance if enclosed
- Plumbing: High pressure PVC with quick disconnects
- Warranty: Lifetime structural on the tub and frame; 2 years on mechanical components; original purchaser
Included & Optional Accessories:
Included
- Custom fit insulated lid
- Built in 1 HP chiller and heater
- Solid White countertop, or any included Staron color
Optional
- Carbon Concrete or any premium Staron countertop (+$250)
- Step stool ($285)
- Replacement filters, 8 pack ($85)
- All weather UV cover for outdoor setups (call for pricing)
Lead Time & Delivery:
Built to order in Southern California with your siding and countertop. Production takes 6 to 8 weeks from your order.
Free curbside delivery in the lower 48. White glove delivery is available as an upgrade; call 760.840.5141 and we'll quote it for your address.
Common Questions:
How is the Signature different from the Core?
Where the equipment goes. The Signature builds the chiller, pump, filtration, and drain into a 92" cabinet with a 60" interior and 140 gallons. The Core is smaller, 60" long with a 55" interior and 120 gallons, and its chiller sits beside it. Both use the same double wall stainless construction, filtration, and 37°F to 105°F range.
Can I switch from cold to hot in one session?
No. Going from about 45°F to about 102°F, or back, takes roughly 4 to 6 hours depending on climate. Most owners cold plunge in the morning and use it as a hot tub at night.
What power does it need?
A standard 120V, 20 amp circuit. It plugs into an outdoor rated GFCI outlet, so most homes need no new wiring. Have an electrician confirm the circuit can carry it.
How cold and how hot does it get?
Down to 37°F and up to 105°F. Chilo says most owners keep it between 45°F and 50°F for cold plunges.
Which countertop colors can I choose?
Solid White and 46 other Staron colors are included at no charge. Carbon Concrete and 53 other premium colors add $250. Every option is in the color guide. Screen colors vary from the real material, so if you choose Other Included Color or Other Premium Color, we'll help you get samples and confirm your color before production begins.
How does it drain?
A floor drain with a hose hookup. Run the hose to a drain or your yard.
What maintenance does it need?
Rinse or swap the filter every 4 to 6 weeks, and drain and refill every 1 to 3 months. Natural wood siding needs resealing every 6 to 12 months; TimberTech doesn't.
Can it go outside?
Yes. The tub and frame are stainless, the siding is rated for sun and rain, and the equipment sits inside the cabinet. If it's enclosed, leave 12" of clearance for ventilation. A UV cover is available for outdoor setups.
What's the warranty?
Lifetime structural coverage on the stainless tub and frame, plus 2 years on the chiller, pumps, filtration, electrical, and controls. It covers the original purchaser. Wood, TimberTech, and countertop finishes aren't covered. For any warranty question, call us at 760.840.5141.
What should I have ready for delivery day?
A level spot that can carry about 1,770 lbs filled, with a 92" x 34" pad plus clearance. You'll also need a 120V, 20 amp GFCI outlet within reach and a place to drain.
Shipping Policy
Free curbside delivery
- Free shipping to the contiguous 48 United States. We do not ship to Alaska, Hawaii, or Canada.
- Your plunge travels by freight truck, not UPS or FedEx. The carrier will contact you to schedule a delivery appointment.
- It arrives on a wooden pallet at your curb or driveway. Moving it indoors, unboxing, setup, and packaging removal are not included.
- A small number of remote addresses carry extra delivery costs. If yours is one of them, we will contact you before anything ships.
White glove delivery (additional cost)
- The crew carries your plunge to the room of your choice on the entry floor, unboxes it, and removes the packaging and pallet. Setup is not included.
- Billed separately after your order is placed. Email support@forgerecoverygroup.com before your plunge ships to arrange it.
- White glove scheduling can add days to your delivery.
Delays
- Weather and seasonal demand can slow freight delivery. Some shipments move to a smaller truck once they reach your area.
Missed deliveries and address errors
- Someone must be home for the scheduled delivery. Redelivery fees from a missed appointment are your responsibility.
- If a shipment is refused or comes back because of an incorrect address, you pay the return and reshipping costs. Free shipping on the original order doesn't change this.
Return and Refund Policy
30 day returns
- Request a return within 30 days of delivery.
- The plunge must be unused, in the condition it arrived, and packed in its original packaging and protective foam. Damage caused by poor repacking is your responsibility.
- Email support@forgerecoverygroup.com with your order number. We will send return instructions and a prepaid freight label. Returns sent without approval will not be accepted.
Your refund
Your refund is the purchase price minus:
- A 25% restocking fee
- The cost of the return freight label
- The 3% payment processing fee
On a $10,000 order with a $600 return label, for example, your refund would be $6,600. Once we receive and inspect the return, approved refunds go back to your original payment method within 10 business days. Your bank may take longer to post it.
Damage on arrival
- Inspect your plunge when it arrives. Report any damage within 48 hours of delivery, with photos and video, to support@forgerecoverygroup.com.
- Reported damage is handled separately from a standard return, and the fees above do not apply.
Choose options